Foam stop

Highly effective silicone-based foam stop for suppressing foam caused by body care products, soiling, soap residue, etc. in whirlpools, swimming pools, above-ground pools, cleaning machines and much more. Thanks to the modern formulation, only a minimal amount needs to be added and consequently only very small amounts of additives are added to the bath water, for example. Dosage: Recommended dosage: approx. 10 ml per m³. The product can be used in cold and hot water systems after briefly shaking it up. For more effective distribution, premixing in water is also helpful. We recommend adding the product evenly while the filter system is running, preferably via the skimmer at a pH value in the range 7.0-7.4. A pronounced filtration phase of at least 48 hours after the initial addition increases the effectiveness. If possible, backwash the filter afterwards and readjust the pH value if necessary. Storage: Store in closed original container at room temperature, dry and preferably well ventilated. Protect from unauthorized access. Data sheets available on request! Always read the label and product information before use! Size: 1 l